Onye na-emepụta UV LED Lekwasị anya na UV LED kemgbe 2009
  • isi_akara ngosi_1info@uvndt.com
  • isi_icon_2+ 86-769-81736335
  • Igwe ọkụ ọkụ UV LED

    • UVET na-enye igwe ọkụ ọkụ ọkụ UV dị ukwuu. Na imewe nke esịtidem reflector, ndị a oven na-enye a edo UV ọkụ maka mụbaa arụmọrụ na usoro ntụkwasị obi. Ejiri ọkụ ọkụ UV LED dị elu, enwere ike idozi anya ọrụ na ike UV ka ọ dabara na usoro ọgwụgwọ UV dị iche iche. Ha nwere ike inye ike dị elu na ngwa ngwa mmepụta ngwa ngwa maka ngwa dị iche iche.
    • Ụlọ UV LED bụ ihe ngwọta dị mma maka ịgwọ ihe ntanye UV, agba, varnishes na resins. Ezubere iji gboo mkpa nke ụlọ ọrụ mmepụta ihe, ha na-enye usoro ọgwụgwọ dị mma na nke ziri ezi na irradiation maka ọtụtụ ihe na akụrụngwa. Kpọtụrụ UVET ka ịmatakwu gbasara ngwọta UV LED.
    Ajujufeiji

    UV LED oven usoro

    Ụdị No.

    CS180A

    CS300A

    CS350B3

    CS600D-2

    Akụkụ dị n'ime (mm)

    180 (L) x180 (W) x180 (H)

    300 (L) x300 (W) x300 (H)

    500 (L) x500 (W) x350 (H)

    600 (L) x300 (W) x300 (H)

    WorkingStatus

    A na-ahụ anya site na windo mgbochi UV

    Ọrụ

    Mechie ụzọ. Igwe ọkụ UV LED na-amalite ịrụ ọrụ na-akpaghị aka.

    Mepee ụzọ n'oge irradiation. Igwe ọkụ UV LED na-akwụsị ozugbo.

    Na-achọ nkọwa teknụzụ ndị ọzọ? Kpọtụrụ ndị ọkachamara nka nka.

    Hapụ ozi gị

    Ngwa UV

    https://www.uvet-adhesives.com/uv-curing-chambers/
    https://www.uvet-adhesives.com/uv-curing-floods/
    https://www.uvet-adhesives.com/uv-curing-chambers/
    https://www.uvet-adhesives.com/uv-curing-chambers/

    Igwe ọkụ UV LED na-agwọ ọrịa bụ ngwa ngwa dị mkpa maka nyocha ihe na usoro mmepụta. Emebere oven ndị a iji gwọọ na ịgbanye ọtụtụ ihe dị iche iche, gụnyere resins, mkpuchi, adhesives na electronic components. Ha na-enyere aka melite ihe onwunwe ma mepụta prototypes dị elu.

    N'ime nyocha ihe, ọkụ ọkụ UV LED bụ ngwa ọrụ dị mkpa maka ọgwụgwọ na ihe na-enye ọkụ iji nyochaa arụmọrụ na ịdịte aka ha. Ha bụ ihe dị mkpa maka ndị nyocha na ndị injinia na-eme nnwale arụmọrụ na nyocha nke resins, mkpuchi na nrapado. Site n'inye ebe ọgwụgwọ a na-achịkwa, ọkụ ọkụ UV LED na-eme ka nsonaazụ na-agbanwe agbanwe na ntụkwasị obi sitere na nnwale ihe.

    N'ọhịa nke prototyping ngwa ngwa, ọkụ ọkụ ọkụ UV LED bụ ngwá ọrụ dị mkpa maka inweta ọgwụgwọ ngwa ngwa nke akụkụ prototype 3D. Njirimara a na-enye ohere maka nyocha ngwa ngwa na nyocha nke akụkụ dị iche iche, bụ nke na-enyere aka na mmepe nke ọma nke prototypes. Ọzọkwa, oven na-enyere aka ịgwọ ngwa ngwa na nke a pụrụ ịdabere na ya nke adhesives na sealants, na-eme ka mmepụta nke prototypes dị elu maka nyocha na nyocha zuru oke.

    Na mmepụta nke ngwa eletriki, ọkụ ọkụ ọkụ UV LED dị mkpa maka ịgwọ adhesives na encapsulants, na-eme ka arụmọrụ dị mma na nkwụsi ike. Ọ bụ ihe kachasị mkpa iji hụ na ntụkwasị obi nke ngwa elektrọnik na ọkwa ọ bụla nke usoro nrụpụta. Ọzọkwa, a na-eji oven eme ihe na mgbakọ elu iji gwọọ elu nke ngwa eletrọnịkị, si otú a na-eme ka ogologo oge na nkwụsi ike ha na-adị ogologo oge.

    Na mmechi, UV LED na-agwọ oven bụ ihe bara uru na nyocha ihe na usoro mmepụta ihe, na-enye ọgwụgwọ na-agbanwe agbanwe na nke a pụrụ ịdabere na ya maka ụdị ihe dị iche iche ma na-akwado mmepe nke prototypes na ngwa eletriki.

     

    Ngwaahịa ndị emetụtara